advantec Advantec Japan
home products catalog MSDS news about us contact us search
 
Filtration Products
 Membranes  Prefilters  Filter Papers & Thimbles  Microbiological Products
 Filtration Accessories  Filter Holders  Cartridges and Capsules  Disposable Syringe Filter Units
 Ultrafiltration  Food Analysis Products  Chromatography Products  Cartridge Housings
 Environmental Monitoring Products
 
DISPOSABLE SYRINGE FILTER UNITS

These syringe filter units are useful for small volume filtration of liquids or gasses or other material-specific applications. Available with filter membranes of the following materials:

MCE (Nitrocellulose) Cellulose Acetate
PTFE, Hydrophilic PTFE, Hydrophobic
Nylon
Disposable Syringe Filter Units
 
  		•  Disposable syringe filter units designed for biological and HPLC applications
  		•  Clear housing and integrated filter assures that no pigments, dyes, or adhesives will leach into the filtrate
  		•  Product code clearly marked on each unit denoting housing type, filter material, and pore size


      Product Specifications
    Unit Type
    3mm
    13mm
    25mm
    30mm
    50mm
    Housing Material*
    Polypropylene
    Polypropylene
    Polypropylene
    Acrylic
    Polypropylene
    Polypropylene
    Housing Diameter (mm)
    3
    13
    25
    25
    30
    50
    Filtration Area (cm2)
    0.06
    0.9
    4.0
    4.0
    4.8
    19.6
    Hold-up Volume (mL)
    ≤0.01
    ≤0.03
    ≤0.1
    ≤0.1
    ≤0.1
    ≤3.0
    Recommended Volume to be Filtered per Unit (mL)
    <2
    <10
    <100
    <100
    <120
    >100
    Maximum Pressure
    psi
    74
    74**
    74**
    74
    128
    50
    MPa
    0.51
    0.51**
    0.51**
    0.51
    0.88
    0.34
    Maximum Temperature
    °F
    140
    140
    140
    113
    356
    140
    °C
    60
    60
    60
    45
    180
    60
    Connections
    inlet: female luer-lock
    outlet: male luer-slip
    7-13.5mm hose barb
      *Acrylic-type are Styrene Acrylonitrile. Polypropylene units can be sterilized by autoclave; acrylic units cannot.
      **For 13HP and 25HP, maximum pressure is 57 psi (0.39 MPa).
     
    MCE (Nitrocellulose) Units
     

      Product Features

  		•  Higher protein binding than cellulose acetate for most proteins
  		•  High porosity provides high flow rate
  		•  Naturally hydrophilic membrane filter
    Contact us for more information on this line of products.
     


      Ordering Information
    Filter Diameter
    Filter Pore Size (μm)
    Housing Material
    Packaging & Ordering Information
    Package Quantity
    Non-Sterile Model No.
    Sterile Model No.
    25 mm
    0.20
    Acrylic
    50
    25AS020AN
    25AS020AS
    0.45
    Acrylic
    50
    25AS045AN
    25AS045AS
    top of this pagetop of this page
     
    Cellulose Acetate Units
     

      Product Features

  		•  Low protein binding: suitable for aqueous protein solutions
  		•  Nitrate-free: suitable for groundwater filtration
  		•  Naturally hydrophilic membrane filter
    Contact us for more information on this line of products.
     


      Ordering Information
    Filter Diameter
    Filter Pore Size (μm)
    Housing Material
    Packaging & Ordering Information
    Package Quantity
    Non-Sterile Model No.
    Sterile Model No.
    3 mm
    0.20
    Polypropylene
    100
    03CP020AN
    03CP020AS
    0.45
    Polypropylene
    100
    03CP045AN
    03CP045AS
    13 mm
    0.20
    Polypropylene
    100
    13CP020AN
    13CP020AS
    0.45
    Polypropylene
    100
    13CP045AN
    13CP045AS
    25 mm
    0.20
    Acrylic
    50
    25CS020AN
    25CS020AS
    0.45
    Acrylic
    50
    25CS045AN
    25CS045AS
    0.80
    Acrylic
    50
    25CS080AN
    25CS080AS
    50 mm
    0.20
    Polypropylene
    10
    50CP020AN
    50CP020AS
    0.45
    Polypropylene
    10
    50CP045AN
    50CP045AS
    top of this pagetop of this page
     
    Hydrophilic Teflon Units
     

      Product Features

  		•  Good chemical and pH resistace: suitable for HPLC filtration
    Contact us for more information on this line of products.
     


      Ordering Information
    Filter Diameter
    Filter Pore Size (μm)
    Housing Material
    Packaging & Ordering Information
    Package Quantity
    Non-Sterile Model No.
    Sterile Model No.
    13 mm
    0.20
    Polypropylene
    100
    13HP020AN
    -
    0.50
    Polypropylene
    100
    13HP050AN
    -
    25 mm
    0.20
    Polypropylene
    100
    25HP020AN
    -
    0.50
    Polypropylene
    100
    25HP050AN
    -
    top of this pagetop of this page
     
    Hydrophobic Teflon Units
     

      Product Features

  		•  Use as a vent or to protect vacuum pumps
    Contact us for more information on this line of products.
     


      Ordering Information
    Filter Diameter
    Filter Pore Size (μm)
    Housing Material
    Packaging & Ordering Information
    Package Quantity
    Non-Sterile Model No.
    Sterile Model No.
    3 mm
    0.50
    Polypropylene
    100
    03JP050AN
    -
    13 mm
    0.20
    Polypropylene
    100
    13JP020AN
    -
    0.50
    Polypropylene
    100
    13JP050AN
    -
    25 mm
    0.20
    Polypropylene
    50
    25JP020AN
    -
    0.50
    Polypropylene
    50
    25JP050AN
    -
    50 mm
    0.20
    Polypropylene
    10
    50JP020AN
    -
    0.50
    Polypropylene
    10
    50JP050AN
    -
    top of this pagetop of this page
     
    Nylon Units
     

      Product Features

  		•  Strong membranes with high thermostability
  		•  Compatible with aqueous and organic solutions (except acids and bases), including most HPLC solvents
  		•  Hydrophilic surface; does not require pre-wetting
    Contact us for more information on this line of products.
     


      Ordering Information
    Filter Diameter
    Filter Pore Size (μm)
    Housing Material
    Packaging & Ordering Information
    Package Quantity
    Non-Sterile Model No.
    Sterile Model No.
    3 mm
    0.22
    Polypropylene
    200
    03NP022AN
    -
    0.45
    Polypropylene
    200
    03NP045AN
    -
    5.00
    Polypropylene
    100
    03NP500AN
    -
    13 mm
    0.22
    Polypropylene
    100
    13NP022AN
    -
    0.45
    Polypropylene
    100
    13NP045AN
    -
    25 mm
    0.10
    Polypropylene
    100
    25NP010AN
    -
    0.10
    Acrylic
    100
    -
    25NS010AS
    0.22
    Acrylic
    100
    -
    25NS022AS
    0.45
    Acrylic
    100
    -
    25NS045AS
    1.20
    Acrylic
    100
    -
    25NS120AS
    30 mm
    0.22
    Polypropylene
    100
    30NP022AN
    -
    0.45
    Polypropylene
    100
    30NP045AN
    -
    1.20
    Polypropylene
    100
    30NP120AN
    -
    5.00
    Polypropylene
    100
    30NP500AN
    -
    top of this pagetop of this page
     
     
    MCE (Nitrocellulose) Cellulose Acetate
    Hydrophilic PTFE Hydrophobic PTFE Nylon
    Copyright©2001-2006 Advantec MFS, Inc. All rights reserved.